We have the pleasure to announce you that we haveover 400 bending solutions into our manufacturing process available for your efficient units.
The main objective of the bending machine is to expand the range that we already offer to our customers. Nowadays, with the new machine, Climetal is able to bend coils with a radius of 100mm.
The bent microchannel heat exchangers will allow you to save space in your machines, and adapt them to any equipment.
We want you to take into account some initial considerations:
Microchannel heat exchangers are lighter than tube and fin coils and it makes easier to curve them. In addition to this, the fins will be less damaged than the aluminum fins of the traditional heat exchangers, because their fins are more rigid and they difficult the bending process.
If we bend the coil in four points, and due to the straight section of 100mm, the heat exchanger will come as a square. We are able to curve coils from (hxl) 100mm(h) x 730mm(l) to 1200mm x 2200mm – headers included.
The bending process do not reduce the capacity of the heat exchangers, as the burst tests demonstrate. Ask to Climetal if you are interested in receiving the test.
Design, the key for a high-performance microchannel heat exchanger.
The design is the key for getting a high-performance microchannel heat exchanger. Climetal, with its long experience in the manufacturing of MCHEx will support you during the design of your bent coils. Climetal will advise you how to make a good selection of the bending radius, and we will help you to choose the most appropriate configuration of your MCHEx in order to get an aesthetic machine with the best performance characteristics. We will also give you a good design practice recommendations as to test the coil in the machine to verify the final design, or assembly suggestions depending of the coils’ shape, weight and dimensions, or just general handling procedures as do not lift the coils by the inlet and outlet connections because they can break. From design to manufacturing CLIMETAL will go hand-in-hand with you.
Quality Made in Europe…
We can claim that our product is one of the best in the market among the competitive products considering our price and quality. This claim is based on the feedback we received from our clients.
We would like to encourage you to try our products, asking for a sample. You just have to contact us right now for a technical selection and/or for a quotation, or just for more information by clicking on the following link: >>> O.E.M Department contact request >>>
¡Muchas gracias por su interés en nuestra empresa! Estaremos encantados de enviarle más información acerca de nuestras innovadoras soluciones de intercambiadores de calor de microcanales especialmente diseñados para su gama de productos. Uno de nuestros representantes se pondrá en contacto con usted lo antes posible.
Uso de cookies
El sitio web www.climetal.com hace uso del recurso de "cookies" para mejorar la experiencia que usted tiene como usuario. Si continúa navegando está dando su consentimiento para la aceptación de las mencionadas cookies y la aceptación de nuestra política de cookies, pinche el enlace para mayor información.