Our technology
Climetal MICROCHANNEL HEAT EXCHANGERS offer a long list of features not found in other condensers. Parallel flow increases performance by up to 45% compared to traditional tube and fin condensers. Its special circuit design reduces internal pressure drop on the gas side by more than 65%, which produces significant savings in compressor energy consumption and weariness. Its slim design and its thin cross flow tube profile decreases air pressure drop by 25% also bringing considerable advantages: smaller fans, less noise and lower electricity consumption.
Improved Heat Transfer
Traditional tube & fin coils are mechanically expanded with no real contact between tubes and fins. Aluminium brazed coils have perfect continuous contact between tubes and fins, assuring an efficient heat transfer.
Smaller is Mightier.
All-aluminium Microchannel Heat Exchangers have an obvious advantage against traditional copper tube condensers: they are much lighter. Despite the 45% increase in working performance, our condensers weigh 60% less than its copper & aluminium counterpart. When designing the appliance this condenser will be placed, this also plays a major role. Now you will be able to design smaller and lighter appliances than before. Therefore, your systems will be lighter, more compact, more silent and more durable than ever before.
The reduced dimensions of CLIMETAL MICROCHANNEL HEAT EXCHANGERS will also allow you to decrease the amount of refrigerant used in your system by 30% and still increase performance, generating remarkable savings in your production process and in the future maintenance of the system. And your systems will be more environmentally friendly.
Climetal´s microchannel technology increases the primary to secondary surface area ratio and reduces the tube´s air shadow to provide maximum heat exchange through our condensers.
Improved Internal Heat Transfer
Due to their small hydraulic diameter, Climetal´s microchannel aluminium tubes transfer heat more efficiently than the traditional round copper tubes.
100% Recyclable and Durable
Zinc coated fins and multi-port tubes are manufactured with alloys specially developed for this technology and flux brazed in an inert atmosphere to create a homogenous chemically steady assembly with leak free joints which guarantee improved corrosion resistance of the A/C unit. In addition, by using only Aluminium to manufacture our condensers, they are 100% recyclable. This greatly reduces its environmental impact.
Test conditions: Refrigerant: R134a, Air speed: 2-5 m/s, Air temp: 40ºC, Gas Inlet pressure: 20 bar, Overheating: 30ºC, Subcooling: 5ºC